Browse all practice questions for the Combat Arms Training and Maintenance (CATM) CDC Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Combat Arms Training and Maintenance (CATM) CDC Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • How does the ignition mechanism of the M203 differ from traditional firearms?
  • On a shotgun, where is the serial number typically located?
  • What are "immediate action" drills?
  • What does the term "travel lock" refer to in the context of the MK 64 machine gun cradle?
  • What is the minimum safe distance for training with the M203 grenade launcher?
  • How often should firearms be inspected for safety?
  • What does the term "dry fire" refer to in firearms training?
  • Which cycle of operation occurs after a round is fired and the recoil causes the barrel and slide to move rearward in the M9 pistol?
  • How many rounds does a bandoleer for the M240B machine gun hold?
  • What function does the disassembly button serve on the M9 pistol?
  • To prevent improper gap space in the gas rings after a short recoil malfunction, the bolt rings should be staggered approximately how far apart?
  • What type of cartridge is known for containing a pyrotechnic projectile in a plastic case?
  • Why is it important to know the effective range of your firearm?
  • What aspect of firearms does CATM training help to improve?
  • Which of the following rounds is specific to the M203 for delivering smoke cover?
  • How many rounds of blank or ball ammunition must be fired to ensure a seal is created after replacing the bolt carrier key?
  • What principle does the M2 machine gun operate on?
  • If the M122A1 tripod legs are not extending or locking properly, what should you use for maintenance?
  • The main purpose of the tripod head in a machine gun mount is to?
  • Which of the following is not a type of ammunition used in the M9 pistol?
  • Which type of M249 round contains no propellant or primer?
  • Which characteristic is essential for selecting the appropriate ammunition for training?
  • What is the primary focus of firearms maintenance training in CATM?
  • If the slide of your M9 pistol does not lock fully forward, what is the probable malfunction?
  • What is one benefit of proper weapon maintenance?
  • What is the purpose of the three-position gas regulator on the M249?
  • What could primarily cause a failure to feed in the M240B machine gun?
  • What does an evaluation firing exercise assess?
  • Cartridge 5.56mm, tracer, M856 should not be used in the M16A1 except under emergency conditions at targets less than how many meters in distance?
  • Under emergency conditions, at what maximum distance should Cartridge 5.56mm, tracer, M856 be used in the M16A1?
  • Which M2 machine gun round combines functions of an armor piercing bullet and incendiary bullet?
  • What type of choke does the Mossberg 12-gauge model 590 shotgun typically have?
  • Turning the windage screw of the MK19 machine gun counterclockwise moves the sight in which direction?
  • What malfunction may occur from incorrectly positioning the first round of a partial belt on the M249 AR feed tray?
  • What step in the M870 shotgun cycle of operation occurs as the shooter pushes the fore end towards the front of the weapon?
  • What does the process of cocking a grenade launcher generally prepare it for?
  • Which component of a firearm is responsible for initiating the firing sequence?
  • What are the four primary rules of firearm safety?
  • What is the length of cracks on the M203 handguard assembly that would make it not fully capable?
  • If the slide of your M9 pistol does not lock fully forward, what is the probable cause?
  • What part of the M3 machine gun tripod provides a front support for the weapon?
  • What is the correct sequence for the firing pin protrusion test on the M203 grenade launcher?
  • Why is it essential to regularly practice sight alignment?
  • What distinguishes the Mossberg 12-gauge model 590 shotgun from the model 500?
  • What does "sustained fire" imply in a training context?
  • What is the function of a "chamber indicator" on a firearm?
  • Which two operations occur simultaneously in the M203 grenade launcher cycle of operations?
  • What action should be taken first when performing a malfunction clearance on the M249 AR?
  • What is the minimum distance you should never fire blank ammunition at a target?
  • Which cycle of operation involves extracting the fired cartridge case from the chamber in the M9 pistol?
  • What happens when the barrel latch of the M203 is depressed?
  • How many rounds of blank or ball ammunition must be fired after replacing the bolt carrier key to ensure a seal is created?
  • What is the objective of the "bolt catch" mechanism?
  • Which assembly houses the trigger assembly, sear, hammer assembly, selector lever, rifle grip, bolt catch, and buttstock assembly?
  • In CATM, which type of training is critical for combat readiness?
  • What is the maximum distance the MK19 machine gun can provide automatic high explosives fire support?
  • What should be done if a weapon malfunctions during training?
  • Why is it important for the M122A1 tripod legs to lock fully?
  • What does "weapon retention" mean?
  • What is the primary use for the 12-gauge breaching cartridge?
  • Which gauge is utilized to inspect the M240B machine gun for barrel erosion?
  • What is the primary objective of CATM training?
  • What type of choke does the Mossberg 12-gauge model 590 shotgun utilize?
  • Which cycle of operation of the M9 pistol occurs as the slide moves forward, stripping a round from the top of the magazine?
  • What does the term 'unlocking' refer to in the M9 pistol's cycle of operation?
  • Which of the following is a key component of shooting fundamentals?
  • Where is the serial number located on a shotgun?
  • Which component of the M9 pistol sits between the firing pin striker and the firing pin?
  • What role does practice play in marksmanship as it relates to CATM training?
  • Which 12-gauge shotgun cartridge contains a pyrotechnic projectile in a corrugated plastic case with a brass plated steel base?
  • Cracks found on the M203 handguard assembly exceeding what length render it not fully capable?
  • The barrel assembly of the M203 grenade launcher is chambered for which type of ammunition?
  • What is the role of a CATM qualification course?
  • What is one of the key responsibilities of a CATM instructor?
  • What is the maximum distance short range training ammunition can be used for any firing exercise?
  • Which M203 grenade launcher round is designed to inflict personal casualties using an air burst effect?
  • What safety equipment is essential during live-fire training?
  • What action should be taken to ensure proper firearm lubrication?
  • If your MK19 machine gun won't shoot, what is the first step you should take?
  • During preventative maintenance checks on the MK19, how many welded pins should be present in the receiver?
  • In the context of firing exercises, why is range safety emphasized?
  • Which button is located on the right side of the receiver, above and ahead of the trigger guard on weapons?
  • What happens when the trigger of the MK19 machine gun is depressed?
  • During which part of the gun handling sequence is "muzzle awareness" critical?
  • During the firing cycle of the M249, what is a common indication of a malfunction?
  • Why is feedback from trainees important in CATM training?
  • During the firing cycle, what component is depressed when the trigger is pulled on the MK19 machine gun?
  • What is the minimum safe distance for training with the M203 grenade launcher?
  • Improperly positioning the first round of a partial belt on the M249 AR feed tray can lead to what malfunction?
  • What does the acronym “TM” stand for in manual documentation for weapons?
  • What is the minimum age requirement to qualify for CATM training?
  • What must a new CATM instructor complete before conducting training?
  • This 12-gauge breaching cartridge is specifically designed to gain access through:
  • What type of round contains a pyrotechnic charge and simulates service ammunition with a flash bang signature?
  • What is a primary goal of firearms maintenance?
  • What type of lubricant is recommended for maintaining the M122A1 tripod?
  • What is a desired outcome of effective CATM training sessions?
  • What kind of maintenance training is included in CATM?
  • Why is understanding firearm anatomy crucial?
  • Why is continuous education important for instructors in Combat Arms Training and Maintenance (CATM)?
  • If adequate range facilities are not available for sustainment training, what is the maximum distance for short range training ammunition usage in any firing exercise?
  • What is the free length for the action spring on the M4 carbine for a failure to chamber malfunction?
  • Which malfunction may indicate a worn extractor in the M249 AR?
  • Which gauge kit is employed to test barrel erosion on the M2 machine gun?
  • What do the actuating rollers do during the feeding cycle operation of the M240B machine gun?
  • What is a common requirement for military personnel before participating in CATM training?
  • What type of firearms are primarily covered under CATM instruction?
  • What is a key characteristic of the Mossberg model 500 shotgun?
  • What does strong communication in a CATM environment foster?
  • What is the importance of situational awareness in shooting?
  • What should be done with a weapon deemed unserviceable?
  • What is the advantage of effective range knowledge for marksmen?
  • What is the consequence of having a bolt deformation of over 50 percent in the MK19 machine gun?
  • Why is environmental awareness important during firing exercises?
  • Which component of the MK64 is crucial for adjusting fire control settings?
  • What is the primary function of the CATM range?
  • What is a key skill emphasized during CATM training?
  • Which M203 grenade launcher round is designed to inflict personnel casualties using an air burst effect?
  • Why are drill exercises essential in weapon training?
  • What should be done immediately after a malfunction in the weapon occurs?
  • What type of training should be done prior to live-fire exercises?
  • What type of ammunition is typically used in CATM training?
  • What are the steps involved in conducting a daily inspection of a firearm?
  • What does the term “misfire” refer to in firearms terminology?
  • What does “sight picture” refer to in marksmanship?
  • Which malfunction occurs if there is a projectile lodged in the barrel of the M249 AR?
  • Which assembly of the M240B machine gun is responsible for feeding, stripping, chambering, firing, extraction, and ejection of cartridges?
  • What does RSO stand for in the context of range safety?
  • What is a key component of firearms safety when handling a weapon?
  • Which term describes the combination of equipment and knowledge needed for effective weapon training?
  • What type of headspace does the M249 automatic rifle feature?
  • How does the structure of CATM training sessions typically accommodate learning?
  • What is the primary purpose of the bore constriction check tool for the M203?
  • Which condition may indicate that the locking block of the M9 pistol is damaged?
  • How does the MK19 machine gun support base defense units?
  • What must be verified during preventative maintenance checks on the MK19 machine gun?
  • What is the approximate burn time of the M583A1 white star parachute round?
  • What is the importance of breathing control in shooting?
  • Which document outlines the policies and procedures for CATM?
  • What happens when the barrel latch of the M203 grenade is depressed?
  • You should never fire blank ammunition at a target distance less than how many feet away from you?
  • Which assembly on the M249 AR is responsible for moving parts rearward?
  • Which aspect of firearms training is crucial for effective combat readiness?
  • Which round of ammunition contains no propellant or primer for the M249?
  • Which assembly for the MK64 gun cradle provides a mounting platform for machine guns?
  • Personnel may use hollow point ammunition where not prohibited by which agreements?
  • Which M240B round is used for training in restricted local and urban training areas?
  • Which aspect does not occur during the cycle of operations when firing the M203?
  • In which publication can you find the PMCS procedures for the M203?
  • How often must military personnel qualify on their assigned firearms?
  • During preventive maintenance checks, what is the significance of finding a crack greater than 1 inch?
  • What is "trigger squeeze" and why is it important?
  • What tool is used to detect dents and minor damage in the M203?
  • If the GO end of the headspace gauge enters freely all the way to the ring and the NO GO end does not enter, how is the headspace described for the M2 machine gun?
  • What is involved in achieving proper sight alignment?
  • How often should firearms be subjected to maintenance checks?
  • What is the approximate muzzle velocity for the M4 Carbine?
  • What is the primary function of the M8 API cartridge?
  • How does CATM contribute to overall military readiness?
  • What benefit does using a Solid Film Lubricant provide for cleaning tripod legs?
  • What is a “malfunction clearance” procedure?
  • What is the significance of safety protocols in CATM training?
  • What is the correct sequence when performing the firing pin protrusion test on the M203 grenade launcher?
  • Which element is crucial during firearm training sessions?
  • What is the range increment for the rear sight range plate of the MK19 machine gun?
  • What is the first inspection you should perform for a weapon with a malfunction on the M2 machine gun?
  • During which cycle of operations does extracting begin in the M249 AR?
  • When should you replace the barrel of the M9 pistol?
  • What is the arming distance for the M651 tactical chemical smoke round?
  • What feature helps the M3 tripod maintain stability during operation?
  • What is the minimum free length of the M9 pistol recoil spring?
  • Which two steps in the M203 cycle of operations occur simultaneously?
  • What type of ammunition is the barrel assembly of the M203 chambered for?
  • Which MK 64 machine gun cradle assembly provides travel lock and mechanical fire control adjustment capability?
  • When inspecting the barrel assembly of the M240B machine gun, which area should be checked for defects?
  • What is an essential qualification for a Range Safety Officer?
  • What is the purpose of using a safety flag in a firearm?
  • Which of the following actions is necessary to load the M203 grenade launcher?
  • Which malfunction is typically linked to improper cleaning and maintenance of the M249 AR?
  • What does CATM stand for in a military context?
  • What might a CATM instructor evaluate to determine training effectiveness?
  • What feature distinguishes the Mossberg model 590 shotgun from the model 500?
  • Which is the standard round used in the M16A2 and M4 series weapons and also linked and used in the M249?
  • Which aspect is crucial in identifying a malfunction in the MK19 machine gun?
  • When using the M249 AR, a failure to chamber malfunction is indicated by?
  • Why is understanding combat stress management vital for CATM trainees?
  • Which button is located on the right side of the receiver, above and ahead of the trigger guard on the M9 pistol?
  • Which cycle of operation of the M9 pistol occurs after the round is fired, causing the barrel and slide to move rearward?
  • Which type of ammunition is NOT used in the M9 pistol?
  • What distinguishes the M200 Blank round of ammunition?
  • Which quality is essential for effective leadership in CATM training?
  • What type of headspace does the M249 automatic rifle have?
  • What is the action performed on the M870 shotgun when the shooter pushes the fore end towards the front of the weapon?
  • What is the arming distance for the M651 tactical chemical smoke round?
  • What is the main difference between preventative maintenance and corrective maintenance?
  • What is the significance of maintaining a clear line of sight when shooting?
  • What is the standard round used in the M16A2 and M4 series weapons?
  • How long does the candle burn on a M583A1 white star parachute round?
  • What type of cartridge is recognized for training purposes in the M249?
  • Personnel may use hollow point ammunition where not prohibited by which of the following?
  • What is the maximum effective range for the M240B machine gun?
  • Which assembly is utilized for mounting machine guns on the MK64?
  • What distinguishes the M200 Blank round of ammunition for the M249?
  • Why is dry firing beneficial in shooting training?
  • What is a key benefit of improved marksmanship for military personnel?
  • What should a soldier do if the M203 grenade launcher fails to fire after being triggered?
  • Which agency oversees the administration of CATM training for the military?
  • What is a common symptom of a shooter exhibiting flinch?
  • How should a firearm be stored when not in use?
  • When does the extracting process begin in the M249 AR cycle of operations?
  • What is one indicator of a successful CATM training session?
  • The model 590 shotgun is particularly noted for which capability?
  • How can instructors assess trainee progress in CATM?
  • What is the minimum free length of the M9 pistol recoil spring?
  • What is an essential component of CATM training for personnel?
  • Which tool is used to detect dents in the M203 that may interfere with projectile progress?
  • Which technical order contains the PMCS procedures for the M203?
  • What is the proper stance for standing shooting position?
  • What is the primary purpose of the bore constriction check tool?
  • What is the function of the receiver assembly on the M249 AR?
  • Which part of the M249 AR pulls moving parts rearward and is fixed to the right side of the receiver?
  • What are "clearance procedures" when dealing with a jammed weapon?
  • What component must be adjusted during the firing pin protrusion test?
  • At what percentage of deformation in the bolt of the MK19 machine gun must it be replaced?
  • What is the purpose of the weapon zeroing process?
  • In the MK64 assembly, what does the term "mechanical fire control adjustment" refer to?
  • Why is confidence in firearms use important for CATM trainees?
  • How should safety protocols be adjusted for nighttime training exercises?
  • What primary skill is enhanced by sustained fire practice?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy